Step 1: Insert the hardware bolts through your deck, from the grip side
Step 2: Place risers onto bolts on the graphic side of your deck, note there are two wheelbase options!
Step 3: Put your trucks over the risers with Kingpins towards the center of the board
Step 4: Screw nuts onto ends of bolts, securing trucks and risers
Step 5: Use your free skate tool to tighten all bolts so hardware head is flush with grip tape
Step 6: Remove axel nuts and speed rings from trucks. Set speed rings aside.
Step 7: Place Spaceball bearings on axels and press wheels over bearings (watch the video for a cool trick!)
Step 8: Place wheel with inserted bearings on axel, graphic side out and tighten axel nut so there is no wheel slop and wheel spins freely. You don't need the speed rings with Spaceballs! Repeat for all 4 wheels
Step 9: Adjust Truck kingpin nut for desired board feel. Tight = Stable, Loose = Carvey
Step 10: Sticker up your deck!
Step 11: Go Skate!