No tariffs on US or Canada orders. Free shipping on most orders.
No tariffs on US or Canada orders. Free shipping on most orders.
Often overlooked, skate hardware is what keeps everything together! With countersunk mounting options for top mounts and ATVs and Panhead for drop and drop throughs you can find the right skate hardware for your board. If you stand over your trucks get counter sunk, if not get pan head.
To generalize, 1.5″ is is usually what we use on our longboards and 1.25″ is what we use on most cruisers and ATVs. This is roughly based on riser height so if you’re using 1/8″ risers go for a 1.25″ bolt, if you’re using 1/4″ or 1/2″ risers then 1.5″ is the way to go.
If you’re setting up a complete make sure you’ve got risers too!
$6.99
$6.99
We’ve categorized the stiffness of our boards into 3 main groups, listed below. The general rule is the faster you’re skating, the stiffer the deck, but this is not universal.
Flexy – Soft and supple flex profile best suited for carving and cruising on longer boards. The bouncy nature of these decks lets you turn deeper and surf your surrounds.
Medium – The do it all of our boards, a perfect balance of stability and carve.
Stiff – From cruisers to downhill boards a stiff flex profile excels in stability and responsiveness. Whether you’re dipping into driveways or bombing a mountain pass you’ll be down with the stiffness.
